ZW016 loose, tight type winding machine for the production of uniform density cylinder cylinder with loose type of yarn dyeing quality. The winding speed of the machine can be controlled automatically through the computer, up to 1100 M / min. The control of radial anti aliasing device is convenient. Advanced yarn clearing and tension mechanism with photoelectric yarn to avoid yarn winding. The precision and sensitivity of the device can be used to ensure that the length (weight) of the winding is uniform. It is an ideal equipment for yarn winding of cotton, hemp, silk and chemical fiber.
Main features:
The bobbin bracket center positioning structure
1 durable metal mandrel holder
2 easy to open bobbin bracket center positioning structure , easy to remove the bobbin winding.
3 the inlet and outlet of the yarn has ceramic protection, which can avoid the weight of the yarn due to friction.
4 groove tube with dust, anti winding device, can prevent the accumulation of dust, to protect the rotating bearing.
5 double-sided arrangement of spindle, each section 12 spindles, can be more than one series installation, up to 9 knots for a (108)
6 rotating pin type and weight type yarn brake freely controlling winding tension.
7 spring bracket pressure balancing device, can make the winding start to the end of the uniform winding density.
8 soft edge device, can make the loose type yarn more are dyeing.
9 Holzer component electronic length measuring device, to ensure that the number of spindles of the spindle is exactly the same.
* user set:
1. Special bobbin center positioning device for
2. diameter 95mm grooved drum for winding various yarn type 3. Self cleaning type electric yarn brake. Suspension type automatic air splicer. The empty bobbin recycling conveyor belt device
|
技术特点tec features |
络筒机技术参数Technical parameters of winding machine |
|
松式槽筒loose tube |
O/D82mm，节距pitch2.5，对称型symmetrical type ( 0°) |
|
紧式槽筒tight tube |
O/D82mm，节距pitch2.5，非对称型asymmetrical type |
|
成型筒子 松式forming bobbin ( loose ) |
0°圆柱型cylindrical，或圆台型round table3°30’，4°20’ |
|
成型筒子 紧式forming bobbin ( tight ) |
0°、3°30’、4°20’、5°57’、9°15’（仅限于膨胀锭子only expansion spindle） |
|
自动定长automatic length |
根据成品件，电子设定卷绕长度，最长可达999999米according to the product , it can set the winding yarn length , maximum length 999999 meter. |
|
配重式纱线制动器weight type yarn brake |
可防止纱线在喂入时出现抖动，提供合适卷绕张力prevent yarn jitter in feed, provide appropriate winding tension |
|
电动式上蜡装置Electric waxing device |
可放入方孔蜡块，并有重力片，每锭一套均匀上蜡put into square hole wax, and gravity, each spindle uniform waxing |
|
清结调节器cleaning regulator |
可方便调节清结刀门间隙it can rasy to cleaning and regulate the distance of knife gete. |
|
横动软边traversing gear |
每节独立电机驱动，横动量可调each independent motor drive, the transverse momentum can be adjusted |
|
配置set |
每节12锭each section of 12 spindles |
|
组合combination |
最大10节连成一台共120锭 max 10 sections connect 1 set 120 spindle |
|
驱动方式Drive mode |
每锭配一长轴变频马达，每面最多60锭，由1只变频器控制Each spindle is equipped with a long axis variable frequency motor, with up to 60 spindles per side, and is controlled by 1 inverters. |
|
最高速度 max speed |
1100米/分钟，每面卷绕均可独立设置1100 M / min, each side can be set up independently |
|
导纱动程traverse range |
松式标配147mm兼有144mm, 154mm; 紧式标配152mm loose parts 147mm,also have 142mm. tight parts 152mm. |
|
纱架平衡器yarn stand balancer |
弹簧平衡调节卷绕压力spring balance adjustment winding pressure |
|
纱线探测器yarn prober |
带光学传感器optical sensors |
|
筒纱最大直径bobbin max diameter |
250mm |
|
启动 / 停止并带大按钮开关ON/OFF button switch |
单锭薄膜开关控制，LED实时显示卷绕米数，车头液晶屏单面总控Single spindle film switch control, LED real-time display of the number of meters, the front side of the liquid crystal screen one side of the total control. |
|
径向防叠装置radial preventing stack |
电脑控制径向防叠参数设定computer control radial preventing stack setting parameters |
|
往复吹吸清洁器round blowing and suction cleaner |
1100W(清洁器功率) power |
|
消耗功率power consumption |
90W/锭 (最高速度)，加清洁器电机功率90w/spindle(max speed), and cleaner power |
|
电源current source |
三相three-phase power 400V+/-10% , 50/60Hz |
|
12锭主机重量/尺寸 the weight /size of 12 spindles |
350kg 2110mm(长length)*950mm(宽wide)*1500mm(高high) |
|
吸尘器重量/尺寸the weight /size of cleaner |
125kg 根据锭数确定 according to the quantity of spindle |
|
车头电控箱重量/尺寸 the weight /size of electric control bos |
45kg 700 mm(长length)*300mm(宽wide)*1320mm(高high) |
